BMW 3 Series E & F Series 3-Way Component Speaker Upgrade Package

Package Content:

• MTX TX6.BMW
• JL Audio XD400/4
• Audio Control LC2i
• 8 Gauge Wiring Kit
• 20m x 16 Gauge Speaker Cable

TX6.BMW Specifications:

• RMS Power : 150W
• Max Power : 450W
• Impedance : 4Ω
• Frequency response : 23Hz – 25kHz
• Sensitivity : 93,5 dB/2,83v/1m
• Tweeter diameter : 25mm (1”)
• Midrange diameter : 10cm (4″)
• Woofer diameter : 20cm (8″)

XD400/4 Specifications:

• Rated Continuous (RMS) Power @ 14.4 V
• @ 4 Ω 75 W RMS x 4
• @ 2 Ω 100 W RMS x 4
• Bridged @ 4Ω 200 W RMS x 2
• Rated Continuous (RMS) Power @ 12.5 V
• @ 4 Ω 60 W RMS x 4
• @ 2 Ω 90 W RMS x 4
• Bridged @ 4Ω 180 W RMS x 2
• General Specifications
• Frequency Response 12 Hz – 22 kHz (+0, -1dB)
• S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω >150 / 50 Hz
• Damping Factor @ 2 Ω >75 / 50 Hz
• THD+N @ Rated Power <1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High)
• Min.Copper Power / Ground Wire Gauge 4 AWG wire
• Fuse Rating 40 A (AFS, AGU or MaxiFuse™)

LC2i Specifications:

• Maximum Speaker Level Input: 400 watts per channel @ 4 ohms
• Maximum Preamp Output: 9.5Vrms/13V peak
• Optional Dash Level Control Remote: +0dB/-19dB
• Frequency Response: 10Hz-100kHz; +/-1dB
• THD: 0.01%
• Signal-to-Noise Ratio: >110dB
• Input Impedance: 20k ohms
• Output Impedance: 150 ohms
• Power Draw: 150 mA
• Recommended Fuse Rating: 1 Amp
• Dimensions: 6.5″ (w) x 1.5″ (h) x 3.25″ (d)
• Weight: 1 lb